Electrical Technician Resume Examples and Templates

Industrial Electrical Technician

• Record all necessary information in the electrical logbook and maintain its accuracy.
• Conduct inspections on electrical schemes, lighting, and control layout, as well as raceway and power layouts.
• Perform maintenance and inspections on industrial control panels, motor controller panels, and operating relays.
• Install, maintain, and inspect DOL, STAR DELTA STARTER, and other electrical equipment.
• Handle and install LV cables for underground systems, including gladding and terminations for 220v and 440v.
• Perform maintenance on Electrical LV Systems, including electrical panels, relays, motor control panels (MDB, SMDB, FDB, Isolators, Feeder Pillars).

Electrical Technician

• Installation of electrical and electronic components, systems, and equipment as per the drawing.
• Good understanding of Electrical Drawings, Planning of Projects, Erection & Maintenance, installation and repair of all electrical machinery.
• Work in control panels, checking voltage, current, and troubleshooting electrical failures.
• Work in industrial control panels and motor controller panels, checking the operating relays and installing DOL and Star Delta starters.
• Take all meter readings and maintain records in the substation and submit daily to the management department at RAS AL KHAIR PORT.
• Maintenance of HV 11kva and 4.4 kva substations, operating them manually and remotely.
• Maintenance and checking of LV panels, including 440v, 220v, and 110v.
• Discussing work with technicians, technologists, programmers, analysts, and other engineers.
• Preparing contract documents and evaluating tenders for construction or maintenance with technicians and other engineers.
• Working efficiently and productively to maximize output while adhering to safety standards in the industries.
• Creating and maintaining reports on electrical work projects while following safety standards.

Electrical Technician

• Conduct troubleshooting and repair of various electrical and automation systems according to Standard Maintenance Procedure (SMP) and Standard Operating Procedure (SOP), following safety standards.
• Read electrical drawings, scheme drawings, and PLC drawings to solve VFD Panel and Variable Frequency Drive malfunction based on fault codes.
• Apply LOTO procedure and isolation techniques to attend scheduled shutdown maintenance of Continues Casting Plant (CCP), including a couple of six-strand billet casting and one six-strand bloom casting, with a capacity of eight thousand tons per day.
• Monitor SCADA for Casting Process Control, Alarms, Trends, Signals, Feedback, and IBA Analyzer. Troubleshoot field sensors' signal in PLC, PLC Digital Input output over process on DI DO Card, PROFIBUS 485 fitting checking IM module, SMPS, solve Proximity, Magnetic sensors, limit switches, Rotary Encoders, Digital sensors, LVDT, Photoelectric sensors, and light barriers.
• Maintain and repair electrical equipment to ensure uninterrupted operation of the Continues Casting Plant (CCP) and meet production targets.
• Follow established procedures and protocols while performing maintenance and repair activities.
• Troubleshoot and resolve equipment malfunctions, utilizing knowledge of electrical systems and control panels.

Electrical Technician Apprenticeship

• Making technical presentation for better understanding of project
• Communicating that presentation to other department in the plant
• Preparing daily progress reports for the project manager
• Planning next day work schedules
• Maintain stock availability
• Supported Project Manager to coordinate program management activities with various agencies and acted as a coordinator between internal agencies.
• Measured voltage readings and interpreted electrical diagrams to ensure precise installation

Electrical Technician

• Drafting technical specifications for camera systems and collecting price offers from companies.
• Keeping documents and tasks between offices as a Radio Operator.
• Maintenance of factory transformers, Cat6 and Fiber Optic Cables.
• Helps solve electrical problems in the factory fiber optic cable connection, troubleshooting, and repair.

Electrical Technician

• Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.
• Star delta control and power design & installation 3 Phase penal installation trouble shooting.
• Plan installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.

Electrical Technician

• Programming and basic monitoring of PLC and Drivers. Sensor and actuators.
• Project, revision system: installation of electrical power supply for the system, motors,sensors, actuators, PLC programming and frequency variators, tests.
• Routine review for electrical check of the plant.
• Works in control boards of aluminum production lines for canning. Works in medium and low voltage.
• Corrective and preventive maintenance to electric motors. Carrying out preventive maintenance (weekly, monthly, etc.) and capturing it in the SAP system.

Electrical Technician

• Applied strong Mathematical knowledge and used various Math applications, such as calculus.
• Organised work to meet demanding production goals of electrical components with 100% success rate.
• Supported engineers in design of components, fixtures and systems through 3D modelling.

Electrical Technician

• Disassembly and installation of new switch gears for its power distribution
• Blueprint interpretation for a clear understanding of the job
• Troubleshooting circuits in junction boxes.
• Travel to different states to pull wire ranging from 600V low, 600V - 69KV medium, and 69KV – 230KV high voltage control panels, transformers and switch gears.

Electrical Technician

• Conduit running,  to its designated location, as well as MC cable and rigid pipe.
• Light fixture installation, receptacles, single or double pole switches.
• Blueprint interpretation for a clear understanding of the job.
• Troubleshooting any circuit type, in the junction boxes that may cause a circuit breaker to trip and solve the problem before turning it back on.

Electrical Technician Trainee

• Involving in Preventive Maintenance scheduling and day-to-day preventive maintenance for Circuit breakers, Motors, Starter Modules, local control Panels.
• Material and manpower planning for preventive break down shut down Maintenance of all electrical equipment’s.
• Inspection of newly procured materials.
• Routine Start-up/Shut down activities in a continuous running process industry.
• Routine activities during construction, pre-commissioning and commissioning stages.

Maintenance Electrical Technician

• Inspect buildings, grounds, and equipment to detect necessary repairs and perform maintenance tasks following established procedures;
• Gather and organize required materials for assigned tasks;
• Control inventory of tools and materials on the job-site and in/out of stock for active projects;
• Maintain a safe work environment by reporting policy, procedure, and guideline violations to immediate supervisor and adhering to all company guidelines and OSHA safety requirements;
• Work with building principals and supervisors to complete projects; Construct and connect facilities and measurement systems for commercial operation;
• Respond to emergency calls as needed;
• Perform final inspections and ensure clean job sites upon completion of projects;
• Maintain and upkeep company tools;
• Form rush, medium, and low voltage lines for efficient commercial operation.

Electrical Technician

• Conducted maintenance on electrical equipment at both Liberty Steelmill and Alaska Gold Minesite.
• Worked as an Instrumentation Technician on a diverse range of equipment.
• Contracted to work on several major projects for multiple clients.

Electrical Technician

• Intervention in electrical failures, Automation; hydraulics; mechanical, pneumatics in the PTA during the shift period.
• Fault detection and resolution in the PTA; Configuration of VFD parameters ,Wiring and connection of electrical divice (motors, PLC, Drivers, Contactors, Circuit Breaker , limit switch,  instrument of level, temperature and motor assembly).

Senior Electrical Technician

• Installed and maintained databases on company's server.
• Installed electrical conduit and wiring for power, controls and lighting.
• Tested, troubleshot and calibrated equipment in shop and field.
• Checked supportive electrical equipment such as brackets and hangers, making repairs when necessary.
• Updated and modified components and systems to improve operation.