Download PDF

Taimoor Hassan


Work experience

Nov 2013Present


Descon Engineering Limited Pakistan

Calculate dimensions and tolerances using knowledge of mathematics and instruments such as micrometers and vernier calipers.

2) Machine parts to specifications using machine tools such as lathes, milling machines, shapers, or grinders.

3) Measure, examine, and test completed units in order to detect defects and ensure conformance to specifications, using precision instruments such as micrometers.

4) Set up, adjust, and operate all of the basic machine tools and many specialized or advanced variation tools in order to perform precision machining operations.

5) Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines.

6) Monitor the feed and speed of machines during the machining process.

7) Study sample parts, blueprints, drawings, and engineering information in order to determine methods and sequences of operations needed to fabricate products, and determine product dimensions and tolerances.

8) Select the appropriate tools, machines, and materials to be used in preparation of machinery work.

9) Lay out, measure, and mark metal stock in order to display placement of cuts.

10) Observe and listen to operating machines or equipment in order to diagnose machine malfunctions and to determine need for adjustments or repairs.

11) Check workpieces to ensure that they are properly lubricated and cooled.

12) Maintain industrial machines, applying knowledge of mechanics, shop mathematics, metal properties, layout, and machining procedures.

13) Position and fasten workpieces.

14) Operate equipment to verify operational efficiency.

15) Install repaired parts into equipment, or install new equipment.

16) Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter.

17) Advise clients about the materials being used for finished products.

18) Program computers and electronic instruments such as numerically controlled machine tools.

19) Set controls to regulate machining, or enter commands to retrieve, input, or edit computerized machine control media.

20) Confer with engineering, supervisory, and manufacturing personnel in order to exchange technical information.

21) Dismantle machines or equipment, using hand tools and power tools, in order to examine parts for defects and replace defective parts where needed.

22) Establish work procedures for fabricating new structural products, using a variety of metalworking machines.

23) Support metalworking projects from planning and fabrication through assembly, inspection, and testing, using knowledge of machine functions, metal properties and mathematics.

24) Confer with numerical control programmers in order to check and ensure that new programs or machinery will function properly, and that output will meet specifications.

25) Fit and assemble parts to make or repair machine tools.

26) Evaluate experimental procedures, and recommend changes or modifications for improved efficiency and adaptability to setup and production.

27) Design fixtures, tooling, and experimental parts to meet special engineering needs.

28) Prepare working sketches for the illustration of product appearance.

29) Install experimental parts and assemblies such as hydraulic systems, electrical wiring, lubricants, and batteries into machines and mechanisms.

30) Set up and operate metalworking, brazing, heat-treating, welding, and cutting equipment.

31) Test experimental models under simulated operating conditions for such purposes as development, standardization, and feasibility of design.



D.A.E (Mechanical) Punjab Board Of Technical Education (Lahore)

Wah Swedish Institude Of Technology Wah Cantt

Three Year Deploma Of Associate Engineering


Matriculation Ssience  Board Of Intermediate And Secondary Education (Rawal Pindi)

Oxford Public School Pindi Gheb Attock


Aug 2010Oct 2010

Basic Computer Course

Islamic School Of Computer Science Pindi Gheb ATTOCK

Ms Excel, Ms Power Point, Ms Words, Typing, Internet



1) Operation and Control -- Controlling operations of equipment or systems.

2) Operation Monitoring -- Watching gauges, dials, or other indicators to make sure a machine is working properly.

3) Mathematics -- Using mathematics to solve problems.

4) Equipment Selection -- Determining the kind of tools and equipment needed to do a job.

5) Troubleshooting -- Determining causes of operating errors and deciding what to do about it.

6) Reading Comprehension -- Understanding written sentences and paragraphs in work related documents.

7) Quality Control Analysis -- Conducting tests and inspections of products, services, or processes to evaluate quality or performance.

8) Equipment Maintenance -- Performing routine maintenance on equipment and determining when and what kind of maintenance is needed.

9) Repairing -- Repairing machines or systems using the needed tools.

10) Active Listening -- Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.

11) Active Learning -- Understanding the implications of new information for both current and future problem-solving and decision-making.

12) Judgment and Decision Making -- Considering the relative costs and benefits of potential actions to choose the most appropriate one.

13) Critical Thinking -- Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.

14) Complex Problem Solving -- Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions.

15) Time Management -- Managing one's own time and the time of others.

16) Installation -- Installing equipment, machines, wiring, or programs to meet specifications.

17) Technology Design -- Generating or adapting equipment and technology to serve user needs.

18) Coordination -- Adjusting actions in relation to others' actions.

19) Learning Strategies -- Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things.

20) Speaking -- Talking to others to convey information effectively.