Download PDF

Work experience


Atlas Copco D55 & D65, Sandvik DP1510
Job profile: In Charge-Excavator(CAT-FS6060 & FS6030), Dumper(100T, 240 T), Drill Machine & Dewatering Pump(CAT C-15 engine) Maintenance. Work Profile ● Enhancing Availability and reliability of Dump Truck, Drilling equipment, Hydraulic Front Shovels. ● Maintaining Documentation for Engine Test, Brake Test, Steering Test etc. ● Ensure Timely Repairing of Various Equipment of Shovels, Dump Truck, Drilling Equipment ● Ensure safety of All Contract Manpower. Maintaining ISO documentation. ● Spare planning and management, SIV, PO, PR creation using SAP. ● Scheduling Preventive Maintenance and Overhauling Plan for All dump Truck and Shovels. ● Machine breakdown analysis and generate root-cause analysis reports using Corrective Action Preventive Action(CAPA) tools as per ISO requirements. ● Responsible for preparation of Technical Specifications/Material Requisitions for Machinery equipment/packages and prepare Tender Packages of the modifications Projects and Review of Engineering Specifications and Data Sheets of Machinery equipment. ● Analyse Condition Monitoring reports with respect to machine performance & imply the corrective actions and Short term and Long term planning for Equipment modification and equipment parts replacement based on the inspection result.

Plant Mechanical Maintenance, Mining Equipment, Reliability

Over 4.11 year qualitative experience in Plant Mechanical Maintenance, Mining Equipment, Reliability Analysis, Asset optimization, Maintenance Planning, SAP PM, KAIZEN, TPM in Reduction Unit of Vedanta Aluminium Limited(Smelter & Reduction Unit) and Hindustan Zinc, Rampura Agucha Mine. ● Worked as a team member of Vedanta Aluminium SEZ Smelter project team. Successfully completed installation and commissioning of Overhead crane, Air compressor, Hydraulic power pack unit, Conveyor etc. ● An effective team leader with skills in troubleshooting, team building capability, abilities in planning & managing resources. ● Formulating Maintenance Strategy & Maintenance Plans & Task Lists ● Knowledge of Using MIS, SCADA, PLC, Ms Office etc. ● Maintaining documentation for ISO 90001, 140001 and OHSAS 18000. Ensuring 100% compliance of Log out-Tag Out, Tool box talk, Safety work permit. ● Maintaining high levels of safety performance and driving a team of technicians to ensure zero accidents with zero loss to humans or plant & machinery through proper training, awareness campaigns, discipline, engineering controls etc ● Planning maintenance activities including Preventive and Breakdown Maintenance and ensuring target achievement. ● Availability calculation, MTTR and MTBF calculation, Equipment failure prediction etc. ● Experience of Using Reliability Analysis Tool such as, FAULT TREE ANALYSIS, FAILURE MODE AND EFFECT ANALYSIS, ROOT CAUSE ANALYSIS, PARETO ANALYSIS, WHY-WHY ANALYSIS etc. ● Vibration Analysis of Rotating Equipment and Oil contamination Analysis. Reducing frequent failure and Enhancing profitability and Customer satisfaction. ● Service contract and Order Management, Warranty and refurbishing, Quality Checking of Equipment and Spare part ● Hands on experience on erection and Trouble shooting of Overhead Crane(Pot Tending Machine), conveyor belt commissioning, Hands on experience of preventive maintenance and troubleshooting of Air Compressor, Gear Box, Hydraulic Pump, Hydraulic Cylinder, Hydraulic Valves(relief valve, DC valve, Retain valve etc), Pneumatic Cylinder, Blower, Pneumatic Valves etc. ● Expert in Reading Hydraulic and Pneumatic Circuit Drawing. ● Primary working Knowledge of PLC, VFD, Electrical Motors etc. ● Spare Planning, creating Maintenance Notification, work order and schedule Monitoring Using SAP. ● Experience of using Total productive Maintenance principle. ● Implemented 5-s, 6-sigma technique in process improvement. ● Knowledge of repairing of various equipment. ● Completed 2 Lean six sigma improvement project to increase reliability of Equipment and to reduce Spare cost. ● Identifying new vendors

Team Member

8.5 Kg
Complete Plant Air System with 225 Nm3/minx 4 Centrifugal Compressor with advance Dryer technology to achieve quality air(/cm2,- DPT). SAP R/3 ECC 6.0 PM MODULE(FUNCTIONAL) ● Creation of Functional Locations, Equipments, Maintenance Work centres, Task List etc ● Creation of Notifications & Orders, Purchase Requisition. ● Cost Analysis on Cost Centre, Location, Plant Section, Planner Group etc. PR/PO status, Quality clearance of GRN, Material Posting, Scheduling of Maintenance Plans, Material availability Planning. ● Worked as a team member for carrying out preventive maintenance of EOT cranes-Indentifying jobs, Checklist creation, Scheduling through SAP, job card creation through SAP, spares management and maintaining the preventive maintenance history in SAP. ● Cost calculation against maintenance cost canter. MTTR & MTBF calculation. Study of consumption pattern of spares. Generation of material availability reports. ACHIEVEMENT Successfully installed the Heavy Duty Mine Dewatering System in RA-Mines in India First Time Run the TOP HAMMER DRILL machine in HARD ROCK on sustainable basis at Rampura-Agucha Mines with proper maintenance and run at perfect parameter. COMPUTER KNOWLEDGE Proficient with the use of MS Office, Ansys, Caesar-II, SAP-PM Module. STRENGTHS Observing power and listening skills Team player with excellent communication and interpersonal skills Versatile with different environment.
Jan 2012Jul 2014

Associate Manager

Hindustan Zinc Ltd
Rampura Agucha ● Role: Associate Manager(Mechanical) ●
Aug 2009Dec 2011

Assistant Manager

Vedanta Aluminium Ltd., Jharsuguda
● Role: Assistant Manager(Mechanical) ●




University Of Petroleum




West Bengal University Of Technology


Burdwan Town School