Sajal Bhardwaj

  • Nagar RJ
Sajal  Bhardwaj


Looking for a position as a Product and Process development Engineer in a multinational organization where my engineering, managing and supervising skills will support to provide quality services and also a golden chance to explore my career in this field.

Work History

Work History
Mar 2014 - Present

Manager-Business Development

Zentic Global Pharma

Manager -Business Development (Medicines Marketing ) and quality controller ,Moradabad,UP,India

May 2012 - Feb 2014

Asst. Manager

Tabsons Auto Components Pvt. Ltd.

Asst. Manager-PPD. -Product Developer (refrigerators and Cars Parts )and Quality Controller, Gurgaon,Haryana, India

Aug 2010 - Apr 2012

Sr. Engineer & Project Leader-CI & Product Maintenance

Haier Appliances (India) Pvt. Ltd. 

Sr. Engineer & Project Leader-Product Maintenance (Refrigerators ) and cost Innovation and controller of product.New Part developer for cost cutting,Pune,Maharashtra,India

Feb 2008 - Aug 2010

Engineer-Product Maintenance

Techno Electronics Ltd (A Videocon Group Company)

Engineer-Product Maintenance-Refrigerators (A Videocon Group Company) Kashipur, India

Oct 2007 - Feb 2008

Junior Engineer-Service

Elder Instrument Pvt Ltd.

Junior Engineer-Service Department -Electronic Weighing Scales. ,Noida, India

Jul 2006 - Oct 2007

Junior Engineer-Maintenance 

Prakash Woolen Mill Ltd
Junior Engineer-Maintenance Moradabad, India
Aug 2005 - Jul 2006

Trainee Junior Engineer

Bharat Heavy Electrical Ltd
Trainee Junior Engineer. Hardwar, India


2000 - 2004

Diploma Engineering- Electrical 

Govt. Polytechnic Moradabad

3 Year full time engineering diploma in Electrical to Government  Polytechnic Institute after successfully attended & achieved good rank in UP in Combined Entrance Test (Sanyukt Pravesh Pariksha ) which is conducted by India Government. 

1999 - 2000

11th Class

UP Board

PCM Group 

1997 - 1998

High School

UP Board

PCM Group


Jul 2011

Certificate Of Excellence -Internal Auditors Training Program for  Environment Management Systems

Quality Perfection Consultants,Muzaffarnagar,UP,India

Competence in the necessary skill required for carrying out and managing Internal Audits has been demonstrated by practical presentations and open book examination.

Feb 2011

Certificate of Achievement

Haier Appliances (India) Pvt.Limited ,Pune,Maharashtra,India 

This is to certify that Sajal Bhardwaj of R&D department has successfully completed the FRP (Fast Re-engineering Process ) project on "Common door switch cover for all models of refrigerators". Project Completion Date : 09/02/2011. 

Jan 2011

Certificate of Achievement

Haier Appliances (India) Pvt.Limited ,Pune,Maharashtra,India

This is to certify that Sajal Bhardwaj of R&D department has successfully completed the FRP (Fast Re-engineering Process ) project on "Vitamin-C Fresh with new specification in all refrigerators". Project Completion Date : 16/01/2011. 

Dec 2010

Certificate Of Excellence -Internal Auditors Training Program for ISO 9001:2008

Haier Appliances (India) Pvt.Limited ,Pune,Maharashtra,India                                 Course Trainer Certificate No.:SGS/SSCE/QMSLAC/509220/P/19877)

Competence in the necessary skill required for carrying out and managing Internal Audits has been demonstrated by practical presentations and written examination.

Nov 2010

Certificate of Achievement

Haier Appliances (India) Pvt.Limited ,Pune,Maharashtra,India 

This is to certify that Sajal Bhardwaj of R&D department has successfully completed the FRP (Fast Re-engineering Process ) project on "Holes added in all polybags of refrigerators for proper air ventilation for packing process timing reducing".Project Completion Date:15/11/2010.

Jul 2010

2D AutoCad Designing & 3D Product Designing in System

CADD CENTER ,Moradabad

One year course Software learned -AutoCad for 2D Design & Pro-E wildfire 4/5,Catia,NX for 3D Design  

Oct 2003

NCC "B" Certificate -Certificate No:UPS/B-Cert/Army/2003/0429

Dy.Director General,National Cader Corps.,NCC Group HQ,Bareilly

This is to certify that the Sajal Bhardwaj Cadet  has passed the Certificate "B" Examination held in 2003 under the authority of Ministry of Defence,Government of India.

Oct 2000

Combined Annual Training Camp and Pre-TSC Certificate

Sanjeev Pande ( Lt.Col)Camp Commandant,Shahjahanpur,UP,India

Certified that No. "UPSD/2000/146573" Rank Cadet Name " Sajal Bhardwaj" of 4/23 UP BN NCC Moradabad college " Govt. Polytechnic Moradabad" has successfully attended the combined annual training camp pre TSC/I/II held at Shahjahanpur WEF 18/10/2000 to 29/10/2000.

Mar 1994

Scout & Guides Training Certificate

UP India Scout & Guides,Distt.-Moradabad

First Class work out while in training period.



Process Development

*After making 3D design final the Object making stages according to Object development process.

*Every stage get priority of process and mention there loop faults and control instruction with the precaution of the stages.

*Provide the required concern instruments to all stages and safety instruments.

*Make sure for proper facility & compatibility according to operators and helpers. 

*Every critical stage show by Red mark and specially provide check list there for proper tracking every hour for safety and foolproofing of bypassing system purpose .

*Combine all needful stages according to cycle time.

*After completion and ensure of all stages ,get cycle time of all stages in mass production.If any stages taking much more time then make it two part for increasing and matching other stages cycle time.

*If every thing is going ok then give approval for mass production to line

*All trials and stages should be done with the all concern department persons and HODs and approval should be mentioned all concern persons sign.

Presentation Skill

* MIS Presentation can be prepare .

*All development stage presentation can be prepare in MS Power Point with Picture Before & After.

*Cost Innovation Presentation can be prepare in MS Power Point with Picture Before & After.

*To be present my all work in MIS with all documentation with the proof of my all presentation.

Part Development & Line Trials

*Give the drawing to Vendor for making samples and time to time visit there for check process.

*Vendors require mould/press tool/zig/fixture etc. according to part & part spec.Vendor make the need action for that and make ready the required things.

*After getting required mould/press tool/zig/fixture according to part drawing ,get the mould/press tool/zig/fixture drawing and check all dimension accordingly.If all things is ok then started sample making work.

*After Insert mould/press tool/zig/fixture in concern machine get the first sample and change and set the require setting of machine or fixture.

*Then receive first sample to vendors and send to quality person for check it for dimension wise and spec wise according to part drawing.

*After getting approval of Quality person go with production trial

*Part send for concern assembly point for assembling it with another part.

*If part successfully fitted and matched with child or sister part then go with on line for other assembly.

*After sucessfully installed in finish good make the required test according spec,transformation  & marketing tets with quality person.

*After getting approval to quality person go with pilot lot for check line problem in mass production.

*If pilot lot get not any issue in production and cycle time then give the approval for mass production to vendor.

*If any stage get not satisfactory results then we can get required approval again to HODs and concern persons on spot like part dimension change required or anything else.

Vendor Selection and Devlopment

*After giving the drawing collect quote to concern part with all spec.

*Check the vendor history and work place.

*Check all Certification and Require government Authority papers by Vendor visits.

*Check and get all information of other places work and feedbacks of Vendor.

*Know about the all machineries  in Vendors plant and know about the care of machine and check all precaution of machine on spot.

*After satisfied of production capacity ,documentation,work method and  market feedback of Vendor.Check other vendors quote and all things same.

*Go with Quote for Negotiation to selected vendors. and give up drawing for making first sample for trial.

*If Samples final the all our spec properly then final the vendor according to quote and all of things.

New Part Development & Part Modification

*Collecting Ideas for object structure design and make the proto-typing with the help of Proto Shop.

*After final the design make the trials for quality and spec and dimension finalization.

*After final the all spec & dimensions of Object prepare the drawing in Paper and final the look design.

*After completion of all above things,start the drawing of Objects in 2D software Or 3D Software as be using in companies .

*After completion of drawing,Signed and approved to all concern persons and HODs .If any modification required then changed and again print master copy signed by all concern HODs and persons.

Bill Of Material

* After Part Name/Spec Finalization ,Create the Part Code with all spec and cost data in Online & Offline system like SAP /ERP / PLM or MS-Excel.

* After completion of all parts codes,Create Sub Bill of Material Codes for Sub Assemblies in Online & Offline system like SAP /ERP / PLM or MS-Excel.

* After completion of all Parts and Sub Bom codes , Create Final Bill of Material Code in Online & Offline system like SAP /ERP / PLM or MS-Excel.

*After completion of all codes,Create & Arranged Parts in relative sub assemblies and all sub assemblies arranged in Final BOM with all details and data according to Production line or Top to Bottom mounted 3 D Drawing.

Software Known

  • SAP-MM • Corel Draw
  • PLM-Product Lifecycle Mgt.                      
  • MDM-Master Data Mgt.                       
  • MS-Office (Excel/Powerpoint/Word etc.)
  • Platform-WinXP, Win7, Win8
  • AutoCAD
  • Pro-E Wildfire 4.0/5.0 

Qualifications Quality

  • I have sound experience of more than 10 years in this field and learnt a lot of new techniques to the things in a better way.
  • Designed implementation procedures, focusing on safety, reliability and efficiency, received special recognition due to company-wide adoption of procedures.
  • Conducted company premises tests of potential implementation including product levels, system bypass effects, product/ resources and process requirements and other ISO requirements Internal Audits.
  • Conducted regular Innovation training sessions to ensure thorough understanding of products.
  • Organized and monitored simulated disaster tests and reviewed results with company management to identify potential issues.
  • Developed and instituted thorough manufacturing tools, resulting in a perfect ISO record.
  • Mapped and labeled every implementation to provide management with detailed schematics of backup system.
  • Improved my junior’s confidence, commitment and satisfaction through bimonthly departmental audits.
  • Identified new and innovative approaches to enhance business growth and profit through the implementation of Innovation programming.
  • Instituted 6S and SAP ERP process to eliminate costly modifications during manufacturing.

Know Personal Information

Father's Name  : Shri Madhu Sudan Bhardwaj

Mother's Name : Smt. Anju Bhardwaj

My Date of Birth : 19/07/1984

My Date of Marriage : 05/12/2011

Latest Mobile Number : +91-8868977308

Land Line Number : +91-591-6502222

PAN Card Number : AQYPB2442D

Current Address : E-247,Kashiram Nagar,Moradabad,UP,India

Permanent Address : Subhash Nagar,Gali No-1,Kashipur,U.S.Nagar,Uttarakhand,India

Family Background : We are four brothers and have no one sister.My father works in UPPCL at Moradabad with designation of "SSO ( Sub Station Operator- Distribution Electricity Line ) and My mother is house of my Younger brothers has married and working with construction company as Purchase Sr. Executive at Dehradun .and others two younger brothers has passed own studies and now in working .One is in UP Roadways Government Job and last brothers is in Telenor company as Trainee at Kiccha,Uttrakhand.They both are unmarried right now.They all lives in Kashipur ,Uttarakhand.

About Me : I am married and my wife is working end of me.She works with DHFL home loan as Assistant Manager at Moradabad.She have 9 Year experience in Finance sector.Now days We have one baby.We lives separate to my family at rented home due to office distance. Right Now We are lives in Moradabad.

My Current CTC : 5 Lac/Annum

Expected CTC : Negotiable

Notice Period : Can join Imediate