Arupananda Patra

Arupananda Patra

Objective

Seeking a position with a dynamic organization that provides me with the opportunity to apply my educational and creative skills which I have acquired, and challenges me to expand my field of knowledge and to make a meaningful contribution.

Summary

Over 19 years experience in Piping detail engineering, FEED, Refinery, Onshore, Offshore, Fixed Platform, Wellhead Platform (Greenfield & Brownfield Projects). FPSO detail engineering,  Hydrogen, Plant Design,  Plant Layout, Power Plants, EPC,  Engineering Design, ANSI, Oil/Gas, Chemical Plants,  Proficient in 3D model PDMS, MDS, PDS, Navisworks & SPR.

Overall Job Responsibilities (Designing and Drafting)

  • Comfortable in planning & execution of piping engineering design activities for Oil & gas Refineries,
  • FPSO, Wellhead/process platform (Greenfield & Brownfield),  Power plant, Metal & Mining(M&M)      through a team of engineers, designers and checkers.
  • Extensive international experience in Piping Engineering activities in Basic & Detail Engineering.
  • Skillful in 3D (PDS,PDMS) MDS, Micro station, Pelican forge, AutoCad, Navisworks & SPR
  • Experience in FEED & details designing for Hydrogen unit, Offshore and Onshore oil & gas,
  • Power Plant and Metal & Mining projects.
  • Familiar with Piping study & design, equipment layout dwg. & nozzle orientation plan drawing
  • Familiar with piping layout/design for tower/columns, pumps, exchangers, vessels, air coolers, Heater & Boilers etc
  • Experience in wellhead  platform (offshore) piping designing (OP WI WAG & Gas Lift line)
  • Experience in detail designing for fixed process platform offshore.
  • Experience in details designing for Launcher/Receiver
  • Preparation of general arrangement drawing, isometric drawing
  • Preparation MTO for piping, piping support & as built drawing
  • Experience in proposal projects.
  • Experience as a lead/supervisor responsibilities for design & drafting teams
  • Experience in plan, schedule and control all activities of the group
  • Capability to work as team or independently without supervision
  • Wide experience in overall piping design activities including coordination & interface between own
  • Discipline / department and other disciplines for the design work, planning task.
  • Communication & coordination with clients for design review & model review activities
  • Checking & implement of design engineering documentation if required
  • Checking of Isometrics & Piping layout drawings
  • I believe everyone in a team is important & carries equal respect & it's a great fun to work as a team

Work History

Work History
Mar 2011 - Present

Senior Piping Designer

Ranhill WorleyParsons

Project: Zawtika gas field development project, Phase 1A Processing Platform.We are doing detail engineering for this project. I am working in sea deck area. There is number of equipment like close drain, open drain, pumps, pig launcher/receiver & caisson. My responsibilities are Piping study, Checking, refer/comments design documents, model review, coordinate with other departments for design work & checking vendor drawings. This project based on 3D model PDMS.Project: ExxonMobil Tapis offshore Project Malaysia (project duration & delivered in 08 moths)I worked as assistant lead designer for this project. This is wellhead Fixed Platform. We were doing details designing for this project on PDMS. There are major equipments like 28 Wellhead with test separator, close drain/open drain vessels, flare system, launcher/receiver & Utility systems. I was leading a team of 14 designers to execute the Plant design & layout of the Wellhead Platform piping. This included all activities from locating the equipment. to issuing isometrics, model reviewing on Naviswork manager, piping deliverables (Eqpt. .& Piping layouts, isometrics, Support Schedule ,MTO’s, Supports,), reviewing clashes, handling site queries, controlling man-hours & Scheduling deliverables issue. Coordinating with other departments & interface offices, client meeting, model review, checking vendor drawings (equipment, valves, flow-meters, strainers, specialty items) Inter-department drawings like PID’s, mechanical data sheets, structure, safety, hook-up, Tie in etc.

Mar 2009 - Mar 2011

Lead Piping Designer

SK E&C India Pvt. Ltd

Worked as Area lead Piping Designer-Jurang Aromatic Corporation Ltd.(JAC) project Singapore. It was Condensate/ Light ends Fractionators/ LPG Jet Fuel Caustic Merox Unit. There are 04 (100,110,115&120) area in this unit.  We were doing study & detail engineering for this projects. I worked on Fractionators area. There are numbers of equipments in this area like fractionator, Heater, Exchangers, Towers, vessels and pumps with 450 lines.I was leading above the unit with 04 designers including me. My responsibilities was supervises to my designer teams, Piping study, Checking, refer/comments design documents, model review, coordinate with other departments for design work & checking vendor drawings.

Jul 2008 - Mar 2009

Senior Piping Designer

Worley Parsons

PETROM FEED Project -Member of OMV Group Romania - This project was Hydrocracker and Hydrogen unit and this plat is located at Romania. We had design for class-III and then Class-II estimate. This was front to end engineering design (FEED) job. We have made all piping and equipment designed/ modeled by PDS 3D model.I worked as Area Lead Piping Designer and my responsibilities was piping study and modeling, Equipment Layout Modeling, Nozzle orientation, Support modeling, ISO’s, vendor drawings review and inter discipline coordination’s/meetings of Fractionators and Fired Heater area for Hydrocracker Unit. There is major equipment like 01 Fractionators, DH condenser, Reflux drum, 04 diesel/feed exchanger, 2 stripper re boiler, 2 kerosene side strippers, Heavy naphtha side cut stripper boiler & stripper, Reflux pumps, Water, Diesel around, product, UCO, kerosene and heavy naphtha pumps etc. with 185 lines in Fractionators area.

Nov 2006 - Jul 2008

Lead Piping Designer

Bechtel Corporation

As an Area Lead Piping Designer - Yarwun-II Project - (Rio Tinto Aluminium) – This projects was based in Brisbane, Australia. It was the Alumina refinery project. This was design and detail engineering. This project handled as a Lead Piping Designer (PDS). My responsibility was supervised to designers and coordination with other disciplines. I was involved with Pipe study & design, equipment layout Design, Nozzle orientation and support Modeling & vendor revue comments In Evaporation, Precipitation, Cooling Tower, Fresh water supply & storage and Oxalate causticisation area. Deputed to Brisbane, Australia for model review, coordination and facility handover meeting.Senior Piping Designer - Reliance Project- This was Captive Power Plant (CPP) Project. It’s located at Jamnagar India. This was design and detail engineering. I was involved in deaerator area.  There are 7 deaerator included 03 CPP, 03 Process & 01 Swing Deaerator and 11 BFW, HP, MP, & LP steam turbine driven and motor driven Pumps. I worked as a Sr. Piping designer-PDS. Myself responsibility for Pipe study & design, equipment layout, Nozzle orientation and support modeling with interdiscipline coordination.

Jul 2005 - Nov 2006

Piping Designer

Technip

AKPO Offshore Project- This project is TOTAL Upstream Nigeria limited. NIGERIA-OML 130 (AKPO Field Development Project) I was working as area Piping Designer (PDS) in AKPO Project Offshore. This project was design and detail engineering. Myself responsibility was study and design of Piping Layout, Equipment layout, Nozzle orientation, supports modeling on pelican forge and Isometrics extractions. This area was included Dehydrator column, HP/LP separator, HP cooler, Colesser, LP fuel gas scrubber, 2 Heater, 2 Filter and Glycol Generator Package.Horizon Project- Canadian Natural Resources Limited (CNRL). I was worked as designer piping. I was involved the detail engineering work through PDS.  My scope was designing 3D (PDS) modeling of piping, Preparation of Piping GAD & Equipment layout drawing, Nozzle Orientation plan drawing & Support modeling in Compressor area.

Jul 1995 - Jul 2005

Piping Designer

Triune (Saipem triune) Projects Pvt. Ltd.

TRIUNE is a Design Engineering & Consultancy Company in Oil & Gas processing (Offshore & Onshore), Petroleum Refining, Petroleum Storage and Transportation, Chemicals, Petrochemicals, Power Plant and Fertilizers.FPSO Project- FPSO TJS 409, Brazil-an FPSO Project of Modec International. I was involved involved in detail engineering. I was preparation of Piping layouts, Equipment layout, Support layout drawings etc. The above piping drawings/deliverables are being made by PDMS Modeling.ERHA FPSO Project- ERHA projects FPSO Nigeria for Esso Exploration & Production Nigeria Limited. This involved detail engineering and as-built for separation unit. I was Preparation of P&ID, PFD and piping layouts, Equipment layout, Support layout drawings etc.IOCL Project- Hydrogen generation unit IOCL, Panipat, India. The LSTK Contractor for the unit was L&T Chiyoda, Licenser was HTAS and PMC was EIL. It includes detail engineering of the unit for L&T, Chiyoda, The unit Includes Predesulphurisation, Desulphurisation and Reformer section. I am involved in Equipment layout, piping layout, MTO, Isometrics & Support layout drawings. IOCL Project- Hydrogen generation unit IOCL, Mathura, India. The LSTK Contractor for the unit was DAELIM INDUSTRIAL CO. LTD. Seoul, Korea. Licenser is TECHNIP, Netherlands and PMC is JACOBS H&G PRIVATE LIMITED, Mumbai. The job involves detail engineering of the unit for Daelim. The unit includes Predesulphurisation, Desulphurisation and Reformer section. Preparation of Piping GAD, Isometrics. Done pipe punching and As-built drawing at Mathura unit site.CPP-3 Project- Central processing platform PETROVIETNAM in VIETNAM. The LSTK contractor for this platform was KEPPEL FELS. This Project includes basic & detail Engineering of the above Platform. My job responsibility was Equipment layout, piping GAD, Isometrics & Support layout drawings. Veba Project- Veba 02 Hanze Field (North Sea Platform).     The LSTK Contractor for this Production & Storage Platform was HYUNDAI HEAVY INDUSTRIES LTD. KOREA. It included the residual Basic Engineering and Detail Engineering of the project. FPSO Project - BHPV and MODEC/Schlumberger (FPSO, Buffalo Field)    Preparation of Basic Engineering Package for Floating Storage and Offloading (FSO) facilities, Buffalo Field Development for SCHLUMBERGER, Singapore. I was involved for preparation of equipment layout drawing, Isometrics drawings and Preparation P&ID and PFD.FPSO Project -    Floating Production, Storage and Offloading (FPSO) System for Brasoil, Brazil. Detail Engineering for Floating Production, Off- Storage and Off-loading (FPSO) facilities for Hyundai Heavy Industries Ltd., Korea. I was involved for preparation of equipment layout drawing, piping layout drawing, piping support, Isometrics drawings, nozzle orientation and Preparation P&ID.

Sep 1992 - Jul 1995

Draughtsman

Source Engineering Pvt. Limited

Source Engineering Pvt. Limited., Orissa, (India). - (SEPL) is a Design Engineering & Construction company of metal and mining Oil & Gas, Fertilizers, Chemicals and Power Plant. I was involved for drafting and designing for conveyer route, fabrication drawings, oil fired furnace, heaters and exchanger’s, general arrangement drawings, isometrics drawings and details drawings.

Education

Education

Diploma

Delhi Institute of Engineering Studies (DIES)
1992

Diploma

National Council Vocational Training (NCVT)

Skills

Skills

PDMS

PDS