A dynamic engineer with more than four years of direct experience in Design & Development of industrial components and sub-assemblies, specifically for down-hole applications, with related FEA and simulations capabilities. Experienced in applied research, product design, troubleshooting and validation. Technically skilled with a diverse of CAD/CAE analytical tools packages.

Work History

Work History
Aug 2014 - Jan 2015

Tech Prof Mechanical Engineer

Halliburton Energy Services
  •  Participated in the design & development process of sub-assemblies for new LWD resistivity tool
  • Performed engineering analysis and design using analytical tools such as Solidworks and ANSYS
  • Participated in developing test procedures, and completing test result analysis for assigned projects
  • Advised and assisted in handling field and manufacturing problems to maintain and improve product quality
  • Participated in troubleshooting and performing corrective action strategies using Root-Cause-Analysis techniques to solve complex technical problems and faults
  • Incorporated Reliability, HSE and Quality analysis techniques during the design process
Jan 2012 - Apr 2014

Graduate Research Assistant

Texas A&M university
  • Formulated a comprehensive Drill-string Finite-Element-Model to simulate and capture different drilling vibration dynamic modes that leads to better parameters identification for improving drilling performance
  • Conducted computer analytical & simulation studies to predict and analyze the effect of conveyance accessories on wireline penetration rates and logging performance in highly deviated open-hole wells
  • Established a numerical simulator model for studying and simulating wireline logging multi-body dynamics in open-hole wells, using Matlab/Simulink, physics engines, and finite element approaches
May 2009 - Dec 2011

Research Associate Mechanical Engineer

Texas A&M University at Qatar
  • Developed & Designed two NOVEL wireline conveyance tools for highly deviated HPHT open-hole wells(a 2.5 years Research project for RasGas/Schlumberger)
  • Performed design analysis and engineering FE-Analysis for thesub-assemblies including structural, linear, Non-linear, and dynamic analysis using analytical tools such as SolidWorks, Adams, Ansys, and Abaqus
  • Prototyping & manufacturing the developed tools including: technical drawings creation, BOM, GD&T, materials & elastomers selection, and machining follow-up
  • Built a complete experimental rig for testing & validation using a full-scale of 10m open-hole mockup
  • Performed destructive & non-destructive tests for assemblies before field testing
  • The Developed tools have been successfully Field-Tested, Patented & being Commercialized
Dec 2008 - Apr 2009

Development Mechanical Engineer

  • Participated in the design & development process of the different Medium-Voltage Switchgear's components using CAD/CAE packages such as I-DEAS software including sheet metal and PMI modules
  • Supported manufacturing and production with technical solutions to improve product quality
  • Created manufacturing drawings including BOM and GD&T, with associate technical documentation
  • Performed intensive in-field training on the production line including assembling, testing, and troubleshooting
Mar 2008 - Jun 2008

Intern. Assistant Mechanical Engineer

SIEMENS AG-Medical Solutions
  • Responsible in Digitizing & Standardizing different production tools
  • Collaborated in building an efficient‘ Tool management system'
  • Participated in design of industrial imaging parts using I-DEAS and UG-NX
Dec 2006 - Jun 2007

Research-Assistant Mechanical Engineer (Masters Thesis work)

BERNAL Torantriebe GmbH
  • Provided conceptual & detailed design of a competitive commercial electro-mechanical door drive opener starting from initial concept to prototyping status. In three months period, two concepts with detailed design have been finalized and successfully approved by the company for production prototyping.
  • Performed analysis & calculations to verify design is fit for purpose and complies with industry standards
  • Concepts have been patented in the German Patent & Trade Mark Office(DPMA)
Jul 2003 - Aug 2004

CAD/CAM Engineer

  • Provided CAD/CAM customers solutions and CNC machining services for different complex industrial parts, and plastic injection molding using software packages VX CAD/CAM, BOB CAD/CAM, and Delcam


Jan 2012 - Aug 2014


Texas A&M University
Oct 2005 - May 2008

M.Eng in Mechanical Engineering / Applied Mechatronics

Universität Paderborn
Oct 2004 - Jul 2005

Diploma in Information Technology & Applied Mechatronics

Information Technology Institute ITI
Sep 1999 - Sep 2003

B.Sc in Mechanical Engneering

Helwan University










  •  US. Patent No. US20130299188, WO2013067255, “Well access Tools”, Nov 2013.(Published)
  • US. provisional patent appl. No. 61/680,359, “Well Access Telebending Tools”, Aug 2012. (Filed)
  • Texas A&M University, Research & Industry: Fostering Synergy, Petroleum Technologies, “Enabling Subsurface Technologies and their Development Challenges”, May 21, 2012.