Download PDF

Jalaram Valand

Instrumentation Engineer

Key Skill 

  •  Working Knowledge of Onshore Oil & Gas Processing Facilities.
  • Support to Designing of P&ID, Process Flow Diagrams, Instrument Layout Drawings.
  • Development of Loop Diagram, Instrument hook-up diagrams, Instrument Logic Diagrams,Cable Routing Diagram etc.
  • Preparation of Instrument Index, Input/Output List, Line List, Instrument List etc.
  • Preparation of Instrument Cable Schedule, Junction Box Schedule, Panel Layout drawings, Instrument Termination diagrams, Instrument alarm schedule etc.
  • Preparation of Operation and control logic philosophy, Instrument Master BOM with hook-up material/Consumables.
  • Preparation of Technical Proposal for Pre-Bid Engineering and Post Bid Engineering.
  • Preparation and Issue of RFQ's , Evaluation of Vendor's Quotation, Clarifications and Technical Bid Analysis.
  • Review of Vendor's Documents, Drawings, Datasheets, specifications etc.
  • Preparation Instrumentation Datasheet and Specification as per project requirement.
  • Liaising with clients, suppliers, contractors and relevant authorities. 
  • Design and Selection of PLC, SCADA, DCS System.
  • Preparation of Automation System documents like, PLC System architecture, Component BOM, PLC Panel GA Drawing, Junction Box schedule, Instrument Cable specification and Cable Schedule.
  • PLC Architecture and Component Bill of Material Preparation using Rockwell Automation Architecture Builder Software.
  • Rockwell Automation Product Selection using ProposalWorx Software.
  • Online Instrument Selection Using E+H Applicator.
  • Control Valve Sizing through Fisher Valve Sizing Tool.
  • Creative Problem Solving and Troubleshooting.
  • Good Communication and Interpersonal Skill.
  • Strong Teamwork Skill.
  • Flexibility and Ability to Compromise.
  • Can able to work in any type of Environment.
  • Willingness to accept responsibility and make decisions.

Work experience

Oct-2015Present

Instrumentation Engineer

Oswal Infrastructure Limited

Project :1 Early Production Facility System for ONGC, Kakinada

Role:

  • Preparation of Instrument Index, Instrument Consumable Bill of Material.
  • Support to Mechanical Design Team for Instrument Installation location and Elevation.
  • Preparation of Instrument Hook-up Drawing.
  • Technical Evaluation of Various Vendor Proposal.
  • Support to Purchase team for finalize the instrumentation vendor.
  • Post order Detail engineering and validation of Vendor datasheet as well as drawings to client/Project Requirement.
  • Co-ordination with Electrical, Mechanical and Process Team for design, Installation and Commissioning of Instrumentation Items.

Project :2 Water Meter Injection Skid, Al-Asab, ADCO, Abudhabi (On behalf of ECIS Group S.r.l. Italy Based 100% Subsidiary of Oswal Infrastructure Limited) 

Role:

  • Preparation of Instrument Index, Instrument and Its Consumable Bill of Material.
  • Preparation of Instrument Hook-up drawing, Loop Drawing, Instrument Termination drawing in ADCO Specified Format.
  • Preparation of Instrument Set Point List, Instrument Cable Schedule, Junction Box Schedule, Cable Routing Diagram etc.
  • Preparation of Final Instrument/Control Valve Datasheet Based on Vendor Confirmation and Client/Project Requirement.
  • Technical Evaluation/Comparison of Various Vendor Proposal.
  • Preparation and Issue of PRS for Instrument, Cables, Instrument Consumables.

Project :3 IBR Skid (Hydro-Chem) for Linde Engineering India Pvt. Ltd.

Role:

  • Preparation of  Instrument Consumable Bill of Material.
  • Evaluation of Vendor Technical Datasheet and Drawings as per Project Requirement.
  • Preparation of Datasheet of PT,FT,LIT, LG, Regulator Valve,  PSV etc.
  • Preparation of Cable Routing Diagram.
  • Support to Execution team for Installation of Instruments, Instrument Accessories, Cable, Cable Conduits etc.

Project :4 Corrosion Inhibitor Skid for Hindustan Petroleum Corporation limited, MLIF, Mangalore

Role:

  • Preparation of Instrument Index, Instrument and Its Consumable Bill of Material.
  • Preparation of Instrument Set Point List, Instrument Cable Schedule, Junction Box Schedule, Cable Routing Diagram etc.
  • Preparation of Final Instrument Datasheet Based on Vendor Confirmation and Client/Project Requirement.
  • Technical Evaluation/Comparison of Various Vendor Proposal.
  • Preparation of Control logic philosophy.
  • Preparation and Issue of PRS for Instrument, Cables, Instrument Consumables.
  • Erection and commissioning of PLC Based Control and Instrumentation system with Interface over Modbus RS485 to Client Master SCADA.

Project :5 LPG Evacuation Vessel with instrumentation for IOCL Bottling Plant at Bishalgarh, Tripura.

Role:

  • Preparation of Instrument and Its Consumable Bill of Material.
  • Preparation of Instrument Datasheet Based on Vendor Confirmation and Client/Project Requirement.
  • Technical Evaluation/Comparison of Various Vendor Proposal.
  • Preparation of Control logic philosophy based on client plant operation system.
  • Preparation and Issue of PRS for Instrument, Cables, Instrument Consumables.
  • Installation and erection supervision at plant and commissioning of system.
  • Training for smooth operation of the system.

Project :6 Rail Mounted Mobile Hopper for Adani Port at Hazira.

 Role:

  • Preparation of PLC Based Control System Bill of Material.
  • Technical Evaluation/Comparison of Various Vendor Proposal.
  • Preparation of Control logic philosophy.
  • Installation and erection supervision at plant and commissioning of system.

Support to Tendering and Estimation Team for Tender Bid.

Inquiry: 1 ONGC Gas Compressor System for Ahmadabad Asset.

  • Preparation of Bill of Material for Instrumentation & Its Consumables and PLC Based Control System.
  • System includes Gas Compressor system for Nawagam GCP, Kalol GCP, Vadu GCP, Motera GCP, Plant Air System with Compressor and Dryer, Suction and Discharge KODs etc. 
  • Preparation of Basic Datasheet for Submission in Tender.
  • Evaluation of Vendor Technical Proposal.

Inquiry: 2 Revamping Job for ONGC Mehsana Asset, HAL Offshore  

  • Preparation of Bill of Material for Instrumentation & Its Consumables and PLC Based Control System.
  • System includes Gas Gathering System, Heater Treater, Indirect water bath heater, Separators, Scrubbers  etc. 
  • Preparation of Basic Datasheet for Submission in Tender.
  • Evaluation of Vendor Technical Proposal.
May-2012Oct-2015

Design And Estimation Engineer

Sai Applied Technologies Private Limited (Formerly Sai Technologies)

Project :1 Instruments and PLC System for Cherry Blossom Project, Vithal Castor Limited, Jagadia 

Role:

  • Preparation of Instrument Index, Instrument Consumable Bill of Material.
  • Preliminary Design and Selection of Instrumentation and Automation System.
  • Evaluation of Vendor quotation and Make Technical Comparison.
  • Price Negotiation with different vendor to finalize the techno-commercial bid.

Project :2 PLC Based Control System with Instruments for SBR based Effluent Treatment  Plat at Sanand.

Role:

  • Preliminary Design and Selection of Instrumentation and Automation System.
  • Evaluation of Vendor quotation and Make Technical Comparison.
  • Price Negotiation with different vendor to finalize the techno-commercial bid.

Education

Jan-2011April-2011

Industrial Automation Engineer Training

Sofcon India Private Limited

Basic training of PLC, SCADA and other products used in industries.

20032005

Secondary Education

Shree N.M.Patel High School, Antroli - Gujarat Board

Completed with Distinction 

PERSONAL DETAILS

Full Name: Jalaram Kiritbhai Valand

Current Location: Ahmedabad, Gujarat

Profile: Male, Married, Indian

Passport: Valid and Transferable (Passport No: K8634332)

Language Known:

  • English: Intermediate
  • Hindi: Intermediate
  • Gujarati: Mother Tongue 

Availability and Self Declaration

2 Month Negotiable Notice Period.

i hereby confirm that the details given in this document is true as per my knowledge, if any ambiguity found in these total responsibility will mine only. 

 

Last Update June-2017