Download PDF


Mobile: +201010206538      +201111968509

 I'm a control system and instrumentation engineer( EC&I) ,graduated 2003.

I  have experiences in automation and instrumentation control for electro-mechanical projects, water  lines projects ,valves, instruments, SCADA, PLCs, DCS , P&ID , Optical Fiber cables , RTUs,  motors ,Pneumatics ,generators,BMS and  Electrical constructions , Electric AutoCAD working and MS office , related job, at any locations I will be ready. Thank you ,

Work History

Feb 2014Feb 2016

Control systems and instrumentation engineer.

Ministry of irrigation - Saudi Arabia

• Establishes design criteria for assigned phases of a project requiring the application of basic engineering principles, material properties, and a familiarity with construction, installation, and maintenance procedures. 
• Provides input to projects during the planning stages developing manpower requirements, man-hour estimates, and completion schedules. 
• Performs complex design tasks, while working closely with a principal designer and discipline engineer. 
• Prepares layout, detail and sketch drawings of unusual, complex, or original designs requiring the application of practical design knowledge. 
• Determines material needs as specified in the project scope. 
• Performs difficult material-take-off for in-house and field procurement requirements. 
• Has an advance understanding of job procedures, standards and specifications and how they are to be correctly applied. 
• Reviews fabricator and vendor prints for conformance with contract specifications and applicable codes and classifications. 
• Provides technical guidance to subordinate design/drafting personnel and reviews completed drawings for technical accuracy and compliance with company, client and national standards specifications and codes. 
• Assists lead designer and engineering with project site-walks and interfaces with on-site personnel as required for finalizing design approach and scope.

*Control system an Instrumentation engineer for water pipelines and farmers outlet


*Operations support - To configure and support the day to day requirements of users with regard to functionality and accessibility within the telemetry/ PLC/ IMCC/ SCADA systems.

 To manage Schneider Clear SCADA  system with a Redundancy and  Raid drivers combined with MODBUS and DNP3 communication protocols  protocols .

*Radio and Communication system.

 Installation and modifying  Radio wireless communication and  (UHF) Bandwidth system from Schneider with antennas.  

*Field instrumentation and calibration.

Mounting and Gauge Pressure Valves , Flow meters, Air Valves and Washing valves from Emerson , Honeywell manufacturing companies.   

Install control valves and electric control wiring system ,(butterfly valves ,gate valves ,Diaphragm valves and Solenoids From Honeywell , ABB and Siemens  .

*Single line and Logic Diagrams.

 Preparing SLDs and Shop drawings  of the project and supervising contractors  installations steps.

Modifying and programing logic diagrams for RTU s and MTUs.  


Jan 2013Jan 2014

Electrical Site Engineer.

Bin shihon contracting and Infrastructure Company/Jeddah

Worked as Electrical site engineer in Ministry of Housing projects. Supervising and managing all electrical works in Gounfoda housing project; about 600 villa. Including control panels and low current communication systems and protection.


Electrical Supervisor engineer

Ministry of education.

consulting office/. Worked as Electrical office and site Engineer. Managing and supervising governmental contracting projects.


Electrical Engineer

Sama misr

 For constructions and contracting/Cairo/Egypt. · Worked as an Electrical Engineer in buildings and projects executive department. I worked in constructing new multipurpose buildings in ministry of defense with cost 3, 500, 000 L. E. I was in charge of executing and follow all electrical and electronic works in the project. This included electrical distribution boards, cable trays, fire alarm system and lighting system.


Operation Engineer

Generators Maintenance

Egyptian Group for Diesel generators, Cairo, Egypt. · Worked as, programing and Operation Engineer. I have worked with three types of generators; Cummins, Perkins and Daewoo. Prepared and managed maintenance operations. Led a group of maintenance technicians.


Control automation engineer.


Bricks factory, Worked as a PLC S700 and S7300 and maintenance engineer.

Prepare material requisitions for modifications and/or replacement of major electrical equipment such as  HV & LV switchboards, Transformers, Large Motor Drives, UPS systems, trace heating systems and other electrical equipment.

To ensure that no faults and stoppages will occur in the plant. Working with SCADA Ifix software.



BACHELORS of electronics  and automation engineering.

Menofia University ,College of Electronic Engineering

study of Electric and automation control and measuring instrumentation   systems.

languages spoken

1-English (good) .

2- Arabic (native).

Training cources

1-Circuit Design for low voltage (LV) networks.

2-Classic Control.

3-PLC  (Advanced and  Starting).


5-PLC with HMI  [Industrial Touch Screens].

6-AutoCAD Training For Electrical .

Technology Skills

Familiar  with SCADA iFIX (GE) -SCADA WINCC  (Siemens)  -MODBUS and DNP3 communication protocols .

-Knowledge of ClearSCADA (Schneider)-Maintenance and commissioning Of  Motors & Inverters and Electrical equipment's-CCTV- Working on Electrical  AutoCAD -MS office -PowerPoint-Word- Excel-Windows operating systems.

Driving Skills

-valid skilled car driving license . 

Personalty Skills

Working Under Pressure, Communication, Emotional Intelligence ,Analytical Ability, Critical Thinking, Decision Making and Problem Solving, Time Management ,Management Reporting .


1-Egyptian engineering syndicate.

Position(s) Held: Electrical engineer  , October 2003

2-Saudi Council of Engineers.

Position(s) Held: Electrical engineer  ,October 2010