Download PDF

Work experience

Sep 2012Present

Designation: Senior Engineer - Civil / Structural

CHINA PETROLEUM PIPELINE BUREAU (CPP), ABU DHABI, UAE
  • EPC OIL EXPORT PIPELINE BADRA-GHARRAF (Phase-I) AT BADRA OIL FIELD - (CPPE–MOTT MCDONALDS- GAZPROM NEFT - PETRONAS)

 The Garraf Light Oil Transportation system will be developed in two (2) Phases:

The pipeline will be built primarily to cater for first oil production from Badra Central Processing Facility (CPF) in year 2013. PCIHBV will build an approximately 96 km pipeline that starts from Garraf-Badra Tie in Area (GBTA) and ends at a designated tie-in coordinate at Badra Tank Farm (BTF). This will be a continuation of 165 Km pipeline from Badra CPF built by another party (GAZPROM).

  • EPC OIL EXPORT PIPELINE BADRA-GHARRAF (Phase-I) AT BADRA OIL FIELD - (CPPE–MOTT MCDONALDS- GAZPROM NEFT - PETRONAS)

The Garraf Light Oil Transportation system will be developed in two (2) Phases:

The pipeline will be built primarily to cater for first oil production from Badra Central Processing Facility (CPF) in year 2013. PCIHBV will build an approximately 96 km pipeline that starts from Garraf-Badra Tie in Area (GBTA) and ends at a designated tie-in coordinate at Badra Tank Farm (BTF). This will be a continuation of 165 Km pipeline from Badra CPF built by another party (GAZPROM).

  • EPC FOR Missan Crude Oil Export Pipeline Project (MOEP)

This project consists of 272 km onshore export crude oil pipeline development in Iraq. Missan Crude Oil Export Pipeline (MOEP) Project is from Junction Point (JP).

Pigging Station to FAO Terminal Pigging Station is divided into two sections (A & B).

Section A: Halfaya to Bin Umr Section (Pipeline Diameter 42’’, 125 km long).

Section B: Bin Umr to Fao Section (Pipeline Diameter 42’’, 147 km long).

  • EPC FOR FCP Gas Export Pipeline Project

This project consists of export pipeline is approximately 100 km. 20” pipeline will extend from CPF to the downstream side of the Shatt Al Arab HDD section where pipeline converts to 24” non-NACE via 20”×24” Pipeline expander. Five (5) RTU block valve stations will be installed along export pipeline.

  • Central Processing Facilities (CPF2):

Project is to develop the No. 2 Central Processing Facilities (CPF2) and the relative facilities to achieve additional production of 100,000 BOPD which was define as Halfaya Project Surface Facility phase two.

Responsibilities

  • review of structural drawings included analysis and design of concrete and steel structures, pipe supports, pipe racks, platforms, equipment foundation, fire water pump house, substation, control building, drawings productions, connections design,
  • define the foundation type,
  • responsible of PMC coordination / EPC Team for the engineering design
  • Providing support to construction team.
  • Resolving and responding to technical queries from contractors.
  • Identify & analyses design changes & modify design drawings & documents accordingly.
  • Participating in contractor corrective actions and ensuring resolution of nonconformities.
  • Provide technical assistance to Civil Inspectors.
  • Attend and contribute to site and project technical meetings as necessary.
  • Involved in proposals to provide man-hour & cost estimation.
  • Visiting project sites for information, analysis and project related activities.
  • Responsible for designing and development of Architectural, Civil & Structural drawings as per project specifications and client standards.
  • Responsible to ensure Designers are compliant with relevant engineering standards, codes, and procedures.
  • Checking Drawing with internal check list and produce drawings with highly standard & professionally.
  • Coordinating with other discipline engineers like MEP, HVAC, Piping, Instrumentations and Water Engineers for information for executions of multi disciplinary projects.

    EPC FOR Missan Crude Oil Export Pipeline Project (MOEP)

    This project consists of 272 km onshore export crude oil pipeline development in Iraq. Missan Crude Oil Export Pipeline (MOEP) Project is from Junction Point (JP).

    Pigging Station to FAO Terminal Pigging Station is divided into two sections (A & B).

    Section A: Halfaya to Bin Umr Section (Pipeline Diameter 42’’, 125 km long).

    Section B: Bin Umr to Fao Section (Pipeline Diameter 42’’, 147 km long).

    EPC FOR FCP Gas Export Pipeline Project

     This project consists of export pipeline is approximately 100 km. 20” pipeline will extend from CPF to the downstream side of the Shatt Al Arab HDD section where pipeline converts to 24” non-NACE via 20”×24” Pipeline expander. Five (5) RTU block valve stations will be installed along export pipeline.

    Central Processing Facilities (CPF2):

    Project is to develop the No. 2 Central Processing Facilities (CPF2) and the relative facilities to achieve additional production of 100,000 BOPD which was define as Halfaya Project Surface Facility phase two.

    Responsibilities

    • review of structural drawings included analysis and design of concrete and steel structures, pipe supports, pipe racks, platforms, equipment foundation, fire water pump house, substation, control building, drawings productions, connections design,
    • define the foundation type,
    • responsible of PMC coordination / EPC Team for the engineering design
    • Providing support to construction team.
    • Resolving and responding to technical queries from contractors.
    • Identify & analyses design changes & modify design drawings & documents accordingly.
    • Participating in contractor corrective actions and ensuring resolution of nonconformities.
    • Provide technical assistance to Civil Inspectors.
    • Attend and contribute to site and project technical meetings as necessary.
    • Involved in proposals to provide man-hour & cost estimation.
    • Visiting project sites for information, analysis and project related activities.
    • Responsible for designing and development of Architectural, Civil & Structural drawings as per project specifications and client standards.
    • Responsible to ensure Designers are compliant with relevant engineering standards, codes, and procedures.
    • Checking Drawing with internal check list and produce drawings with highly standard & professionally.
    • Coordinating with other discipline engineers like MEP, HVAC, Piping, Instrumentations and Water Engineers for information for executions of multi disciplinary projects.

 

May 2009Aug 2012

Engineer-Civil /structural

Tebodin Middle East Ltd

Designation: Engineer-Civil /Structural

Structural Design of the following projects:

A. Projects:

  • Qatar Petroleum – EPC for Ras Laffan Emergency & Safety College, Qatar.
  • Qatar Petroleum – FEED for replacement of Pumps, Mesaieed tank farm project, Qatar.
  • Borouge – FEED for New Sea water basin for polymer Industry, Ruwais, Abu Dhabi.
  • Borouge – FEED for New safety training centre, Ruwais, Abu Dhabi.
  • Dubai Supply Authority (DUSUP) – EPC for Additional pipelines project (Hassyan), Dubai.
  • GASCO – FEED & EPC works for Replacement of 16" condensate pipeline from Habshan to Ruwais, Abu Dhabi

B.Responsibilities :

  • Working in a team environment and involving various FEED & EPC Civil Engineering projects, such as Onshore Oil & Gas projects, Power Plant projects, Water & Sewage systems and Infrastructure projects and Industrial projects.
  • Design & Detailing Various types of structures, such as R.C.C buildings, Substations, Storage tanks, Sewerage & Drainage structures and Industrial Structures.
  • Involved Pipeline & Piping projects consists of Block valve stations, Scraper launcher & receiver station, Pump shelters, Pipe racks, Cross over platforms, Pipe supports & Sleepers etc.
  • Responsible to handle projects independently. And feeding information & knowledge sharing with team members/Designers to execute projects effectively.
  • Coordinating & Assist the Senior Structural Engineer in ensuring good quality design outputs, as per the relevant procedures.
  • Design & Analysis of various types of structures by using STAAD Pro, Mat3D, Foundation3D & Spread sheets.
  • Involved in proposals to provide man-hour & cost estimation.
  • Visiting project sites for information, analysis and project related activities.
  • Responsible for designing and development of Architectural, Civil & Structural drawings as per project specifications and client standards.
  • Responsible to ensure Designers are compliant with relevant engineering standards, codes, and procedures.
  • Reviewing Client information & drawings and Vendor drawings.
  • Checking Drawing with internal check list and produce drawings with highly standard & professionally.
  • Coordinating with other discipline engineers like MEP, HVAC, Piping, Instrumentations and Water Engineers for information for executions of multi-disciplinary projects.
Jun 2007Mar 2009

Engineer-Civil /structural

Al Bateen Engineering and Consultancy, Abu Dhabi

 Designation: Engineer-Civil /Structural Structural Design of the following projects:

projects

  • Commercial Building(3B+G+M+16T+R), Mohamed Bin Zayed City, Sector Z6/, Plot #. C7(Program Manager: KEO International Consultants)
  • Commercial Building(3B+G+M+18T+R), Abu Dhabi, Sector E4/02, Plot #C74.
  • Commercial Building(G+M+7T+R), Abu Dhabi, Mohamed Bin Zayed City, Sector E10, Plot #265.

Education

Sep 2002Jun 2007

Bachelor degree in Civil engineering

Aleppo University

Accumulative Grade: V.Good, Top 5 Student in the Department of Construction Management

         

Skills

MS Office
AutoCAD
PRIMAVERA 6
for Planning and Scheduling
SAP2000
Structural Analysis,especially for Shells and low rise structures
Etabs
Structural Analysis,especially for High rise structures
SAFE
Structural Analysis,especially for slabs and Mat anlysis
STAAD2006
Structural Analysis,especially for Steel design
RAM
Connection design program
Prokon
used for verification of certain element design like transfer beam

References

Chen Feng-project engineer

project coordinator at Tebodin ,Telephone Number 00971508411327

Omar Akaad-General manger

Albateen general manger,Telephone number 00971506425416

Ali Shahid-Senior engineer

CPP Senior process engineer , we worked together on Gazprom project . Telephone Number 00971569769956

Certifications

Nov 2010Present

PMP TRAINING

Cambridge institute
completion of PMP traninng
Oct 2010Present

IBC special seismic detailing code

Abu Dhabi Municipality
Sep 2013Present

HSE traning

Abu Dhabi safety center

Current location :

office work based in Abu Dhabi, UAE Site work based in Bassra ,Iraq

Brief

  • I have 7+ years of versatile experience in Detailed Engineering / EPC / FEED projects in On-shore project design and construction works besides engineering of infrastructures.
  • Beside my job as structural engineer, I am involved in internal auditing for other discipline. I enrolled to HSE course .